Register

Recent questions and answers in Structural Analysis

0 answers
0 votes
GATE Civil 2024 Set 1 | Question: 22
Consider the data of $f(x)$ given in the table.\begin{array}{|c|c|c|c|}\hline i & 0 & 1 & 2 \\\hline x_{i} & 1 & 2 & 3 \\\hline f\left(x_{i}\right) & 0 & 0.3010 & 0.4771 ...
0 answers
0 votes
GATE Civil 2024 Set 1 | Question: 23
The plane frame shown in the figure has fixed support at joint $\text{A}$, hinge support at joint $\text{F}$, and roller support at joint $\text{I}$. In the figure, $\tex...
1 answers
0 votes
GATE Civil 2021 Set 2 | Question: 39
A perfectly flexible and inextensible cable is shown in the figure (not to scale). The external loads at $\text{F}$ and $\text{G}$ are acting vertically.The magnitude of ...
0 answers
0 votes
GATE Civil 2021 Set 2 | Question: 7
A single story building model is shown in the figure. The rigid bar of mass ‘$\text{m}$’ is supported by three massless elastic columns whose ends are fixed against r...
0 answers
0 votes
GATE Civil 2021 Set 2 | Question: 20
A propped cantilever beam $\text{XY}$, with an internal hinge at the middle, is carrying a uniformly distributed load of $\text{10 kN/m}$, as shown in the figure.The vert...
0 answers
0 votes
GATE Civil 2021 Set 2 | Question: 38
A prismatic fixed-fixed beam, modelled with a total lumped-mass of $\text{10 kg}$ as a single degree of freedom $\text{(SDOF)}$ system is shown in the figure.If the flexu...
0 answers
0 votes
GATE Civil 2021 Set 1 | Question: 21
The equation of deformation is derived to be $y=x^{2}-xL$ for a beam shown in the figure.The curvature of the beam at the mid-span (in units, in integer) will be ________...
0 answers
0 votes
GATE Civil 2021 Set 1 | Question: 22
A truss $\text{EFGH}$ is shown in the figure, in which all the members have the same axial rigidity $\text{R}$. In the figure, $\text{P}$ is the magnitude of external hor...
0 answers
0 votes
GATE Civil 2021 Set 1 | Question: 41
Employ stiffness matrix approach for the simply supported beam as shown in the figure to calculate unknown displacements/rotations. Take length, $L=8\text{ m}$; modulus o...
0 answers
0 votes
GATE2020-CE-1-5
Consider the planar truss shown in the figure (not drawn to the scale)Neglecting self weight of the numbers, the number of zero-force members in the truss under the actio...
0 answers
0 votes
GATE2020-CE-1-41
A rigid, uniform, weightless, horizontal bar is connected to three vertical members P , Q and R as shown in the figure (not drawn to the scale). All three members have id...
0 answers
0 votes
GATE2020 CE-2-7
A weightless cantilever beam of span L is loaded as shown in the figure. For the entire span of the beam, the material properties are identical and the cross section is r...
0 answers
0 votes
GATE2020 CE-2-30
Joints $I,J,K,L,Q$ and $M$ of the frame shown in the figure (not drawn to the scale) are pins. Continuous members $IQ$ and $LJ$ are connected through a pin at $N$. Contin...
0 answers
0 votes
GATE2020 CE-2-42
The plane truss has hinge supports at $P$ and $W$ and is subjected to the horizontal forces as shown in the figure (not drawn to the scale)Representing the tensile force ...
0 answers
0 votes
GATE2017 CE-2-14
Consider the following frame in the figure:If the axial and shear deformations in different members of the frame are assumed to be negligible, the reduction in the degree...
0 answers
0 votes
GATE2017 CE-2-31
Two prismatic beams having the same flexural rigidity of $1000 \: kN-m^2$ are shown in the figures.If the mid-span deflections of these beams are denoted by $\delta_1$ an...
0 answers
0 votes
GATE2017 CE-2-32
Consider the prismatic beams with the clamped supports P, Q, and R as shown in the figures.Given that eh modulus of elasticity, $E$ is $2.5 \times 10^4$ MPa; and the mome...
0 answers
0 votes
GATE2017 CE-2-42
Consider the portal frame shown in the figure and assume the modulus of elasticity, $E=2.5 \times 10^4$ MPa and the moment of inertia, $I= 8 \times 10^8 \: mm^4$ for all ...
0 answers
1 votes
GATE2019 CE-1: 5
A plane truss is shown in the figure (not drawn to scale).Which one of the options contains ONLY zero force members in the truss?$\text{FG,FI,HI,RS}$$\text{FG,FH,HI,RS}$$...
0 answers
0 votes
GATE2019 CE-1: 7
Consider the pin-jointed plane truss shown in the figure $\text{(not drawn to scale)}$.Let $R_{P}, R_{Q}$ and $R_{R}$ denote the vertical reactions (upward positive) appl...
0 answers
0 votes
GATE2019 CE-1: 32
The rigid-jointed plane frame QRS shown in the figure is subjected to a load $P$ at the joint $R$. Let the axial deformations in the frame be neglected. If the support $S...
0 answers
0 votes
GATE2019 CE-1: 39
A portal frame shown in figure (not drawn to scale) has a hinge support at joint P and a roller support at joint R. A point load of $50 \: kN$ is acting at joint in R in ...
0 answers
0 votes
GATE2019 CE-2: 20
The degree of static indeterminacy of the plane frame as shown in the figure is ________
0 answers
0 votes
GATE2019 CE-2: 37
A plane frame shown in the figure (not to scale) has linear elastic springs at node H. The spring constants are $k_x = k_y = 5 \times 10^5 kN/m$ and $k_{\theta} =3 \times...
0 answers
0 votes
GATE2019 CE-2: 38
A rolled $I$-section beam is supported in a $75 \: mm$ wide bearing plate as shown in the figure. Thicknesses of flange and web of the $I$ section $20 \: mm$ and $8 \: mm...
0 answers
0 votes
GATE2016-2-33
The portal frame shown in the figure is subjected to a uniformly distributed vertical load $w$ (per unit length).The bending moment in the beam at the joint ‘Q’ iszer...
0 answers
0 votes
GATE2016-1-6
Consider the plane truss with load P as shown in the figure. Let the horizontal and vertical reactions at the joint $\textbf{B}$ be $H_B$ and $V_B$, respectively and $V_C...
0 answers
1 votes
GATE2016-1-31
A $3$ m long simply supported beam of uniform cross section is subjected to a uniformly distributed load of $w=20$kN/m in the central $1$ m as shown in the figure.If the ...
0 answers
0 votes
GATE2016-1-32
Two beams $PQ$ (fixed at $P$ and with a roller support at $Q$, as shown in Figure I, which allows vertical movement) and $XZ$ (with a hinge at $Y$) are shown in the Figur...
0 answers
0 votes
GATE2016-1-33
A plane truss with applied loads is shown in the figure.The members which do not carry any force areFT, TG, HU, MP, PLET, GS, UR, VR, QLFT, GS, HU, MP, QLMP, PL, HU, FT, ...
0 answers
0 votes
GATE2017 CE-1: 7
The figure shows a two-hinged parabolic arch of span $L$ subjected to a uniformly distributed load of intensity $q$ per unit length.The maximum bending moment in the arch...
0 answers
0 votes
GATE2017 CE-1: 29
A planar truss tower structure is shown in the figure.Consider the following statements about the external and internal determinacies of the truss.Externally DeterminateE...
0 answers
0 votes
GATE2017 CE-1: 40
The value of $M$ in the beam ABC shown in the figure is such that the joint B does not rotate.The value of support reaction (in kN) at B should be equal to _________.
0 answers
0 votes
GATE2015-2-6
A horizontal beam $ABC$ is loaded as shown in the figure below. The distance of the point of contraflexure from end $A$ (in m) is _________
0 answers
0 votes
GATE2015-2-8
A guided support as shown in the figure below is represented by three springs (horizontal, vertical and rotational) with stiffness $k_x, k_y$ and $k_{\theta}$ respectivel...
0 answers
0 votes
GATE2015-2-33
A simply supported beam AB of span, $L=24$ m is subjected to two wheel loads acting at a distance, $d=5$ m apart as shown in the figure below. Each wheel transmits a load...
0 answers
0 votes
GATE2015-1-7
For the beam shown below, the stiffness coefficient $K_{22}$ can be written as$\dfrac{6EI}{L^2} \\$$\dfrac{12EI}{L^3} \\$$\dfrac{3EI}{L} \\$$\dfrac{EI}{6L^2}$
0 answers
0 votes
GATE2015-1-33
Consider the singly reinforced beam section given below (left figure). The stress block parameters for the cross-section from $IS:456-2000$ are also given below (right fi...
0 answers
0 votes
GATE2015-1-37
For the $2D$ truss with the applied loads shown below, the strain energy in the member $XY$ is _____ kN-m. For member $XY$, assume $AE=30$ kN, where $A$ is cross-section ...
0 answers
0 votes
GATE2014-2-35
The tension (in kN) in a $10$ m long cable, shown in the figure, neglecting its self-weight is$120$$75$$60$$45$
To see more, click for all the questions in this category.