GO Civil
Login
Register
Dark Mode
Brightness
Profile
Edit Profile
Messages
My favorites
My Updates
Logout
Filter
Recent
Hot!
Most votes
Most answers
Most views
Previous GATE
Featured
Recent questions in Structural Engineering
0
votes
0
answers
1
GATE Civil 2024 Set 1 | Question: 14
Which one of the following statements related to bitumen is FALSE? Kinematic viscosity is a measure of resistance to the flow of molten bitumen under gravity. Softer grade bitumen possesses higher softening point than hard grade bitumen. ... specified test conditions. Ductility test is carried out on bitumen to test its adhesive property and ability to stretch.
Which one of the following statements related to bitumen is FALSE?Kinematic viscosity is a measure of resistance to the flow of molten bitumen under gravity.Softer grade ...
admin
4.2k
points
admin
asked
Feb 16
Construction Materials and Management
gatecivil-2024-set1
kinematic-viscosity
bitumen
desirable-properties-of-bitumen
+
–
0
votes
0
answers
2
GATE Civil 2024 Set 1 | Question: 19
The elements that DO NOT increase the strength of structural steel are Carbon Manganese Sulphur Chlorine
The elements that DO NOT increase the strength of structural steel areCarbonManganeseSulphurChlorine
admin
4.2k
points
admin
asked
Feb 16
Steel Structures
gatecivil-2024-set1
steel-structures
construction-materials
+
–
0
votes
0
answers
3
GATE Civil 2024 Set 1 | Question: 20
Consider a balanced doubly-reinforced concrete section. If the material and other sectional properties remain unchanged, for which of the following cases will the section becomes under-reinforced? Area of tension reinforcement ... compression reinforcement is increased. Area of tension reinforcement is decreased. Area of compression reinforcement is decreased.
Consider a balanced doubly-reinforced concrete section. If the material and other sectional properties remain unchanged, for which of the following cases will the section...
admin
4.2k
points
admin
asked
Feb 16
Concrete Structures
gatecivil-2024-set1
reinforced-concrete-section
construction-materials
structural-analysis
+
–
0
votes
0
answers
4
GATE Civil 2024 Set 1 | Question: 22
Consider the data of $f(x)$ given in the table. \begin{array}{|c|c|c|c|} \hline i & 0 & 1 & 2 \\ \hline x_{i} & 1 & 2 & 3 \\ \hline f\left(x_{i}\right) & 0 & 0.3010 & 0.4771 \\ \hline ... value of $f(1.5)$ estimated using second-order Newton's interpolation formula is $\_\_\_\_\_\_$. (rounded off to $2$ decimal places).
Consider the data of $f(x)$ given in the table.\begin{array}{|c|c|c|c|}\hline i & 0 & 1 & 2 \\\hline x_{i} & 1 & 2 & 3 \\\hline f\left(x_{i}\right) & 0 & 0.3010 & 0.4771 ...
admin
4.2k
points
admin
asked
Feb 16
Structural Analysis
gatecivil-2024-set1
numerical-answers
interpolation
data-analysis
+
–
0
votes
0
answers
5
GATE Civil 2024 Set 1 | Question: 23
The plane frame shown in the figure has fixed support at joint $\text{A}$, hinge support at joint $\text{F}$, and roller support at joint $\text{I}$. In the figure, $\text{A}$ to $\text{I}$ indicate joints of the frame. If the axial deformations are neglected, the degree of kinematic indeterminacy is $\_\_\_\_\_\_$. (in integer).
The plane frame shown in the figure has fixed support at joint $\text{A}$, hinge support at joint $\text{F}$, and roller support at joint $\text{I}$. In the figure, $\tex...
admin
4.2k
points
admin
asked
Feb 16
Structural Analysis
gatecivil-2024-set1
numerical-answers
kinematics
analysis-of-frames
+
–
0
votes
0
answers
6
GATE Civil 2024 Set 1 | Question: 28
Find the correct match between the plane stress states and the Mohr's circles. $\text{(P)-(III); (Q)-(IV); (R)-(I); (S)-(II)}$ $\text{(P)-(III); (Q)-(II); (R)-(I); (S)-(IV)}$ $\text{(P)-(I); (Q)-(IV); (R)-(III); (S)-(II)}$ $\text{(P)-(I); (Q)-(II); (R)-(III); (S)-(IV)}$
Find the correct match between the plane stress states and the Mohr's circles.$\text{(P)-(III); (Q)-(IV); (R)-(I); (S)-(II)}$$\text{(P)-(III); (Q)-(II); (R...
admin
4.2k
points
admin
asked
Feb 16
Solid Mechanics
gatecivil-2024-set1
mohr-circle
stress-paths
solid-mechanics
+
–
0
votes
0
answers
7
GATE Civil 2021 Set 2 | Question: 6
Strain hardening of structural steel means experiencing higher stress than yield stress with increased deformation strengthening steel member externally for reducing strain experienced strain occurring before plastic flow of steel material decrease in the stress experienced with increasing strain
Strain hardening of structural steel meansexperiencing higher stress than yield stress with increased deformationstrengthening steel member externally for reducing strain...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
simple-stress-and-strain-relationship
+
–
0
votes
0
answers
8
GATE Civil 2021 Set 2 | Question: 7
A single story building model is shown in the figure. The rigid bar of mass $\text{m}$' is supported by three massless elastic columns whose ends are fixed against rotation. For each of the columns, the applied lateral force $\text{(P)}$ ... $6\sqrt{\frac{6EI}{mL^{3}}}\text{rad/s}$ $\frac{2}{L}\sqrt{\frac{EI}{m}}\text{rad/s}$
A single story building model is shown in the figure. The rigid bar of mass ‘$\text{m}$’ is supported by three massless elastic columns whose ends are fixed against r...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
slope-deflection-method
lateral-deflection-profile
+
–
0
votes
0
answers
9
GATE Civil 2021 Set 2 | Question: 8
Seasoning of timber for use in construction is done essentially to increase strength and durability smoothen timber surfaces remove knots from timber logs cut timber in right season and geometry
Seasoning of timber for use in construction is done essentially toincrease strength and durabilitysmoothen timber surfacesremove knots from timber logscut timber in right...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
construction-materials
material-behavior-and-properties
timber
+
–
0
votes
0
answers
10
GATE Civil 2021 Set 2 | Question: 9
In case of bids in Two-Envelop System, the correct option is Technical bid is opened first Financial bid is opened first Both (Technical and Financial) bids are opened simultaneously Either of the two (Technical and Financial) bids can be opened first
In case of bids in Two-Envelop System, the correct option isTechnical bid is opened firstFinancial bid is opened firstBoth (Technical and Financial) bids are opened simul...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
construction-management
bidding
+
–
0
votes
0
answers
11
GATE Civil 2021 Set 2 | Question: 19
A solid circular torsional member $\text{OPQ}$ is subjected to torsional moments as shown in the figure (not to scale). The yield shear strength of the constituent material is $\text{160 MPa}$. The absolute maximum shear stress in the member (in $\text{MPa}$, $\textit{round off to one decimal place}$) is __________________________
A solid circular torsional member $\text{OPQ}$ is subjected to torsional moments as shown in the figure (not to scale). The yield shear strength of the constituent materi...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
numerical-answers
torsion
shear-stress
+
–
0
votes
0
answers
12
GATE Civil 2021 Set 2 | Question: 20
A propped cantilever beam $\text{XY}$, with an internal hinge at the middle, is carrying a uniformly distributed load of $\text{10 kN/m}$, as shown in the figure. The vertical reaction at support $\text{X}$ ( in $\text{kN}$, $\textit{in integer}$) is ___________
A propped cantilever beam $\text{XY}$, with an internal hinge at the middle, is carrying a uniformly distributed load of $\text{10 kN/m}$, as shown in the figure.The vert...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
numerical-answers
analysis-of-beams
cantilever-beam
+
–
0
votes
0
answers
13
GATE Civil 2021 Set 2 | Question: 28
A prismatic steel beam is shown in the figure. The plastic moment, $M_{P}$ calculated for the collapse mechanism using static method and kinematic method is $M_{P,static}> \frac{2PL}{9}=M_{P,kinematic}$ $M_{P,static}= \frac{2PL}{9}\neq M_{P,kinematic}$ $M_{P,static}= \frac{2PL}{9}= M_{P,kinematic}$ $M_{P,static}< \frac{2PL}{9}= M_{P,kinematic}$
A prismatic steel beam is shown in the figure.The plastic moment, $M_{P}$ calculated for the collapse mechanism using static method and kinematic method is$M_{P,static} \...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Steel Structures
gatecivil-2021-set2
concept-of-plastic-analysis
beams-and-frames
+
–
0
votes
0
answers
14
GATE Civil 2021 Set 2 | Question: 29
A frame $\text{EFG}$ is shown in the figure. All members are prismatic and have equal flexural rigidity. The member $\text{FG}$ carries a uniformly distributed load $\text{w}$ per unit length. Axial deformation of any member is neglected. Considering the joint $\text{F}$ being ... $\text{0.375 wL}$ $\text{0.453 wL}$ $\text{0.482 wL}$ $\text{0.500 wL}$
A frame $\text{EFG}$ is shown in the figure. All members are prismatic and have equal flexural rigidity. The member $\text{FG}$ carries a uniformly distributed load $\tex...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
flexural-and-shear-stress
+
–
0
votes
0
answers
15
GATE Civil 2021 Set 2 | Question: 37
An elevated cylindrical water storage tank is shown in the figure. The tank has inner diameter of $\text{1.5 m}$. It is supported on a solid steel circular column of diameter $\text{75 mm}$ and total height $\text{(L)}$ of $\text{4m}$ ... $\text{(h)}$ of the water permissible (in $\text{m}$, $\textit{round off to one decimal place}$) is ________________________
An elevated cylindrical water storage tank is shown in the figure. The tank has inner diameter of $\text{1.5 m}$. It is supported on a solid steel circular column of diam...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Solid Mechanics
gatecivil-2021-set2
numerical-answers
buckling-of-column
+
–
0
votes
0
answers
16
GATE Civil 2021 Set 2 | Question: 38
A prismatic fixed-fixed beam, modelled with a total lumped-mass of $\text{10 kg}$ as a single degree of freedom $\text{(SDOF)}$ system is shown in the figure. If the flexural stiffness of the beam is $4 \pi ^{2}$ $\text{kN/m}$, its natural frequency of vibration (in $\text{Hz}$, $\textit{in integer}$) in the flexural mode will be ______________
A prismatic fixed-fixed beam, modelled with a total lumped-mass of $\text{10 kg}$ as a single degree of freedom $\text{(SDOF)}$ system is shown in the figure.If the flexu...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
numerical-answers
stiffness-and-flexibility-methods
structural-analysis
+
–
0
votes
1
answer
17
GATE Civil 2021 Set 2 | Question: 39
A perfectly flexible and inextensible cable is shown in the figure (not to scale). The external loads at $\text{F}$ and $\text{G}$ are acting vertically. The magnitude of tension in the cable segment $\text{FG}$ (in $\text{kN}, \textit{round off to two decimal places}$) is ________________________
A perfectly flexible and inextensible cable is shown in the figure (not to scale). The external loads at $\text{F}$ and $\text{G}$ are acting vertically.The magnitude of ...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Structural Analysis
gatecivil-2021-set2
numerical-answers
analysis-of-cables
+
–
0
votes
0
answers
18
GATE Civil 2021 Set 2 | Question: 41
A rectangular cross-section of a reinforced concrete beam is shown in the figure. The diameter of each reinforcing bar is $\text{16 mm}$. The values of modulus of elasticity of concrete and steel are $2.0 \times 10^{4} \text{ MPa}$ ... $\text{(x)}$ for the uncracked section (in $\text{mm}, \textit{round off to one decimal place}$) is ______________
A rectangular cross-section of a reinforced concrete beam is shown in the figure. The diameter of each reinforcing bar is $\text{16 mm}$. The values of modulus of elastic...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Concrete Structures
gatecivil-2021-set2
numerical-answers
prestressed-concrete-beams
+
–
0
votes
0
answers
19
GATE Civil 2021 Set 2 | Question: 42
The activity details for a small project are given in the Table. ... $\text{days}, \textit{in integer}$) for project completion is __________________________
The activity details for a small project are given in the Table.$$\begin{array}{|cl|cI|cI|}\hline&\textbf{Activity} & \textbf{Duration (days)} & \textbf{Depends on} \\ \h...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
numerical-answers
construction-management
project-planning
+
–
0
votes
0
answers
20
GATE Civil 2021 Set 2 | Question: 43
An equipment has been purchased at an initial cost of $₹ 160000$ and has an estimated salvage value of $₹ 10000$. The equipment has an estimated life of $5$ years. The difference between the book values (in ₹, $\textit{in integer}$) ... at the end of $4^{\text{th}}$ year using straight line method and sum of years digit method of depreciation is______________
An equipment has been purchased at an initial cost of $₹ 160000$ and has an estimated salvage value of $₹ 10000$. The equipment has an estimated life of $5$ years. Th...
go_editor
5.3k
points
go_editor
asked
Mar 1, 2021
Construction Materials and Management
gatecivil-2021-set2
numerical-answers
cost-estimation
+
–
0
votes
0
answers
21
GATE Civil 2021 Set 1 | Question: 4
A propped cantilever beam $\text{EF}$ is subjected to a unit moving load as shown in the figure (not to scale). The sign convention for positive shear force at the left and right sides of any section is also shown. The $\text{CORRECT}$ qualitative nature of the influence line diagram for shear force at $\text{G}$ is
A propped cantilever beam $\text{EF}$ is subjected to a unit moving load as shown in the figure (not to scale). The sign convention for positive shear force at the left a...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Solid Mechanics
gatecivil-2021-set1
shear-force
+
–
0
votes
0
answers
22
GATE Civil 2021 Set 1 | Question: 5
Gypsum is typically added in cement to prevent quick setting enhance hardening increase workability decrease heat of hydration
Gypsum is typically added in cement toprevent quick settingenhance hardeningincrease workabilitydecrease heat of hydration
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Construction Materials and Management
gatecivil-2021-set1
material-behaviour
+
–
0
votes
0
answers
23
GATE Civil 2021 Set 1 | Question: 6
The direct and indirect costs estimated by a contractor for bidding a project is $₹160000$ and $₹20000$ respectively. If the mark up applied is $10\%$ of the bid price, the quoted price (in ₹) of the contractor is $200000$ $198000$ $196000$ $182000$
The direct and indirect costs estimated by a contractor for bidding a project is $₹160000$ and $₹20000$ respectively. If the mark up applied is $10\%$ of the bid pric...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Construction Materials and Management
gatecivil-2021-set1
construction-contracts
cost-estimation
+
–
0
votes
0
answers
24
GATE Civil 2021 Set 1 | Question: 20
The state of stress in a deformable body is shown in the figure. Consider transformation of the stress from the $\text{x-y}$ coordinate system to the $\text{X-Y}$ coordinate system. The angle $\theta$, locating the $\text{X}$-axis, is ... $\text{MPa}, \textit{round off to one decimal place}$) in $\text{x-y}$ coordinate system is ______________________
The state of stress in a deformable body is shown in the figure. Consider transformation of the stress from the $\text{x-y}$ coordinate system to the $\text{X-Y}$ coordin...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Solid Mechanics
gatecivil-2021-set1
numerical-answers
transformation-of-stress
+
–
0
votes
0
answers
25
GATE Civil 2021 Set 1 | Question: 21
The equation of deformation is derived to be $y=x^{2}-xL$ for a beam shown in the figure. The curvature of the beam at the mid-span (in units, in integer) will be _________________
The equation of deformation is derived to be $y=x^{2}-xL$ for a beam shown in the figure.The curvature of the beam at the mid-span (in units, in integer) will be ________...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Structural Analysis
gatecivil-2021-set1
numerical-answers
analysis-of-beams
+
–
0
votes
0
answers
26
GATE Civil 2021 Set 1 | Question: 22
A truss $\text{EFGH}$ is shown in the figure, in which all the members have the same axial rigidity $\text{R}$. In the figure, $\text{P}$ is the magnitude of external horizontal forces acting at joints $\text{F}$ ... of the horizontal displacement of joint $\text{G}$ (in $\text{mm}, \textit{round off to one decimal place}$) is _____________________
A truss $\text{EFGH}$ is shown in the figure, in which all the members have the same axial rigidity $\text{R}$. In the figure, $\text{P}$ is the magnitude of external hor...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Structural Analysis
gatecivil-2021-set1
numerical-answers
analysis-of-trusses
+
–
0
votes
0
answers
27
GATE Civil 2021 Set 1 | Question: 29
A wedge $\text{M}$ and a block $\text{N}$ are subjected to forces $\text{P}$ and $\text{Q}$ as shown in the figure. If force $\text{P}$ is sufficiently large, then the block $\text{N}$ can be raised. The weights of the wedge and the block are negligible ... $\alpha$' (rounded off to one decimal place) is $0.6$ $0.5$ $2.0$ $0.9$
A wedge $\text{M}$ and a block $\text{N}$ are subjected to forces $\text{P}$ and $\text{Q}$ as shown in the figure. If force $\text{P}$ is sufficiently large, then the bl...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Engineering Mechanics
gatecivil-2021-set1
friction
+
–
0
votes
0
answers
28
GATE Civil 2021 Set 1 | Question: 30
Contractor $\text{X}$ is developing his bidding strategy against Contractor $\text{Y}$. The ratio of $\text{Y's}$ bid price to $\text{X's}$ cost for the $30$ previous bids in which Contractor $\text{X}$ has competed against Contractor $\text{Y}$ is given in the ... is $0\%$ more than $0\%$ but less than $50\%$ more than $50\%$ but less than $100\%$ $100\%$
Contractor $\text{X}$ is developing his bidding strategy against Contractor $\text{Y}$. The ratio of $\text{Y’s}$ bid price to $\text{X’s}$ cost for the $30$ previous...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Construction Materials and Management
gatecivil-2021-set1
construction-management
bidding
+
–
0
votes
0
answers
29
GATE Civil 2021 Set 1 | Question: 38
Refer the truss as shown in the figure (not to scale). If load, $F=10\sqrt{3}\text{ kN}$, moment of inertia, $I=8.33\times 10^{6}\text{ mm}^4$, area of cross-section, $A=10^{4}\text{ mm}^2$, and length, $L=2\text{ m}$ ... members of the truss, the compressive stress (in $\text{kN/m}^2, \textit{in integer}$) carried by the member $\text{Q-R}$ is _______________
Refer the truss as shown in the figure (not to scale).If load, $F=10\sqrt{3}\text{ kN}$, moment of inertia, $I=8.33\times 10^{6}\text{ mm}^4$, area of cross-section, $A=1...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Solid Mechanics
gatecivil-2021-set1
numerical-answers
simple-stress-and-strain-relationship
+
–
0
votes
0
answers
30
GATE Civil 2021 Set 1 | Question: 39
A prismatic cantilever prestressed concrete beam of span length, $L = 1.5 \text{ m}$ has one straight tendon placed in the cross-section as shown in the following figure (not to scale). The total prestressing force of $50 \text{ kN}$ in the ... $\text{Mpa}, \textit{in integer}$) experienced at point $Q$' will be _____________
A prismatic cantilever prestressed concrete beam of span length, $L = 1.5 \text{ m}$ has one straight tendon placed in the cross-section as shown in the following figure ...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Concrete Structures
gatecivil-2021-set1
numerical-answers
prestressed-concrete-beams
+
–
0
votes
0
answers
31
GATE Civil 2021 Set 1 | Question: 40
A column is subjected to a total load $(P)$ of $60\text{ kN}$ supported through a bracket connection, as shown in the figure (not to scale). The resultant force in bolt $R$ (in $\text{kN}, \textit{round off to one decimal place}$) is _____________________________
A column is subjected to a total load $(P)$ of $60\text{ kN}$ supported through a bracket connection, as shown in the figure (not to scale).The resultant force in bolt $R...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Steel Structures
gatecivil-2021-set1
numerical-answers
simple-and-eccentric-connection
bracket-connection
+
–
0
votes
0
answers
32
GATE Civil 2021 Set 1 | Question: 41
Employ stiffness matrix approach for the simply supported beam as shown in the figure to calculate unknown displacements/rotations. Take length, $L=8\text{ m}$; modulus of elasticity, $E=3\times 10^{4} \text{N/mm}^{2}$ ... (in $\text{mm}, \textit{round off to integer}$) under $\text{P=100 kN}$ in downward direction will be _________________
Employ stiffness matrix approach for the simply supported beam as shown in the figure to calculate unknown displacements/rotations. Take length, $L=8\text{ m}$; modulus o...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Structural Analysis
gatecivil-2021-set1
numerical-answers
slope-deflection-method
simply-supported-beam
+
–
0
votes
0
answers
33
GATE Civil 2021 Set 1 | Question: 42
A square plate $\text{O-P-Q-R}$ of a linear elastic material with sides $1.0\text{ m}$ is loaded in a state of plane stress. Under a given stress condition, the plate deforms to a new configuration $O-{P}'-{Q}'-{R}'$ as shown ... $\text{O-P-Q-R}$ (in $\text{mm}, \textit{round off to one decimal place}$) is __________________
A square plate $\text{O-P-Q-R}$ of a linear elastic material with sides $1.0\text{ m}$ is loaded in a state of plane stress. Under a given stress condition, the plate def...
Arjun
13.0k
points
Arjun
asked
Feb 19, 2021
Steel Structures
gatecivil-2021-set1
numerical-answers
working-stress-concepts
+
–
0
votes
0
answers
34
GATE2020-CE-1-5
Consider the planar truss shown in the figure (not drawn to the scale) Neglecting self weight of the numbers, the number of zero-force members in the truss under the action of the load $P$, is $6$ $7$ $8$ $9$
Consider the planar truss shown in the figure (not drawn to the scale)Neglecting self weight of the numbers, the number of zero-force members in the truss under the actio...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Structural Analysis
gate2020-ce-1
structural-analysis
structural-engineering
analysis-of-trusses
+
–
0
votes
0
answers
35
GATE2020-CE-1-6
A reinforcing steel bar, partially embedded in concrete, is subjected to a tensile force $P$. The figure that appropriately represents the distribution of the magnitude of bond stress (represented as hatched region), along the embedded length of the bar, is
A reinforcing steel bar, partially embedded in concrete, is subjected to a tensile force $P$. The figure that appropriately represents the distribution of the magnitude o...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Construction Materials and Management
gate2020-ce-1
structural-steel-composition
reinforced-steel
+
–
0
votes
0
answers
36
GATE2020-CE-1-8
During the process of hydration of cement, due to increase in Dicalcium Silicate $(C_2S)$ content in cement clinker, the heat of hydration increases decreases initially decreases and then increases does not change
During the process of hydration of cement, due to increase in Dicalcium Silicate $(C_2S)$ content in cement clinker, the heat of hydrationincreasesdecreasesinitially decr...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Construction Materials and Management
gate2020-ce-1
concrete-mix-design
cement-properties
clinker
+
–
0
votes
0
answers
37
GATE2020-CE-1-13
A body floating in a liquid is in a stable state of equilibrium if its metacentre lies above its centre of gravity metacentre lies below its centre of gravity metacentre coincides with its centre of gravity centre of gravity is below its centre of buoyancy
A body floating in a liquid is in a stable state of equilibrium if its metacentre lies above its centre of gravitymetacentre lies below its centre of gravitymetacentre co...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Engineering Mechanics
gate2020-ce-1
equilibrium-equations
+
–
0
votes
0
answers
38
GATE2020-CE-1-19
A planar elastic structure is subjected to uniformly distributed load, as shown in the figure (not drawn to the scale) Neglecting self-weight, the maximum bending moment generated in the structure (in $kN.m$, round off to the nearest integer), is _______.
A planar elastic structure is subjected to uniformly distributed load, as shown in the figure (not drawn to the scale)Neglecting self-weight, the maximum bending moment g...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Solid Mechanics
gate2020-ce-1
bending-moment
numerical-answers
planar-elastic-structure
+
–
0
votes
0
answers
39
GATE2020-CE-1-29
A rigid weightless platform $\textbf{PQRS}$ shown in the figure ( not drawn to the scale) can slide freely in the vertical direction. The platform is held in position by the weightless member $\textbf{OJ}$ and four weightless, frictionless rollers. Points $\textbf{O}$ ... of horizontal component of the reaction ( in $kN$) at pin $\textbf{O}$, is $90$ $120$ $150$ $180$
A rigid weightless platform $\textbf{PQRS}$ shown in the figure ( not drawn to the scale) can slide freely in the vertical direction. The platform is held in position by ...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Engineering Mechanics
gate2020-ce-1
equilibrium-equations
+
–
0
votes
0
answers
40
GATE2020-CE-1-30
A cantilever beam $\textbf{PQ}$ of uniform flexural rigidity (EI) is subjected to a concentrated moment M at $\textbf{R}$ as shown in the figure The deflection at the free end $\textbf{Q}$ is $\large\frac{ML^2}{6EI} \\$ $\large\frac{ML^2}{4EI} \\$ $\large\frac{3ML^2}{8EI} \\$ $\large\frac{3ML^2}{4EI} $
A cantilever beam $\textbf{PQ}$ of uniform flexural rigidity (EI) is subjected to a concentrated moment M at $\textbf{R}$ as shown in the figure The deflection at the fre...
go_editor
5.3k
points
go_editor
asked
Feb 27, 2020
Solid Mechanics
gate2020-ce-1
flexural-and-shear-stress
flexural-rigidity
+
–
Page:
1
2
3
4
...
7
next »
GO Civil
Email or Username
Show
Hide
Password
I forgot my password
Remember
Log in
Register